FIMI X8SE 2020 Foldable and Portable Design Drone
Small design and Lightweight
The Xiaomi FIMI X8SE 2020 drone comes at a size of only 203.8 x 91 x 46.6 mm and with a total weight of 370g, hence the FIMI X8 SE comes with a very small size and portable body design so that you can easily carry it anywhere.
Suitable for any conditions
The Xiaomi FIMI X8SE 2020 drone is a combination of the 3-axis mechanical framework and the latest professional control functions, which will allow you to take high-quality image shooting with an untroubled video transmission even if the drone is flying in a strong windy condition.
Sony IMX 378 sensor
The best part of FIMI X8SE 2020 is it has a Sony IMX378 12 MPx sensor, and a size of 1 / 1,26 which is the best, and an f/12.2 inch aperture lens. Here the power consumption is considerably lower and has a higher dynamic range with better color performance.
Visual tracking system
With the artificial intelligence technology of the visual tracking system, it can easily accurately locate the target.
Better image processor
The FIMI X8SE 2020 allows you to shoot an amazing 4K video with a recording speed of 100 Mbps and a shutter speed up to 1/8000 second. It uses F-LOG mode and DNG raw image in order to hold more post-processing details to the user.
The real-time video transmission function
FIMI X8 SE has a high definition digital video transmission and its video quality shot is higher and the delay is delayed
Longer flying time
To make FIMI X8SE 2020 stay in the air longer, it uses the aerodynamic design, efficient engine, propeller, and high-density smart lithium batteries.
Different remote controllers
These controllers are easily compatible with all types of mobile phones and also the iPad Mini can control them. Hence you don’t need to buy an extra remote controller.
Many protection functions for a safer flight
FIMI X8SE 2020 has many protections for a safer flight, including the Return to Home, Dual IMU Systems, GPS Real-time, Automatically Hover When Approaching No-fly Zone, Low-battery Reminding for Return, Wind Warming, Excessive Power Warning, and so on. I have tried all of them, and I feel that they are beneficial.
SAR (Search And Rescue ) mode
FIMI X8SE 2020 uses a SAR mode for rescue purposes. It has a flight time as high as 33 minutes, which is very helpful for rescue missions.
Frequently Asked Questions (FAQs)
A: 1. Please read the Quick Start Manual, Disclaimer, and Safety Operation Instruction first.
2. Please fully recharge the drone and RC.
3. Please update to the latest firmware.
4. Please calibrate the RC, compass, and gimbal before taking off in an environment without electromagnetic interference.
5. Drone tail should face the user when flying.
7. Please do not get close to the drone when propellers work.
8. FIMI doesn’t provide TF cards, so please purchase a C10/U3 TF card with the storage of 8G-64G.
A: X8SE is designed for consumer use. Its main goal is satisfying consumer’s flying experience. It can reach as high as 500m, and as far as 5000m. Once the drone reaches its maximum height or distance, it will stop climbing or going forward.
A: If the motors do not automatically stop due to the aircraft roll, please push the left joystick inward and downward to the maximum extent, and simultaneously press the remote control automatic takeoff/automatic landing button for 5 seconds, and the motor will stop.
A: During the flight, the drone’s behavior isn’t matching commands from the remote control operation, you can try to calibrate the remote control. Calibration method: Select Remote Control Calibration in App Remote Control Settings > Click to enter the median calibration, do not touch the joystick >after the median calibration is successful, jump to the joystick calibration > after the joystick calibration is successful, jump to the wheel calibration.
Note: When the remote controller is calibrated, please turn off the power of the drone; during the flight, the remote controller cannot be calibrated.
A: The remote controller and the drone that has been connected before shipping. The remote controller and the drone will automatically be connected successfully after turn on the power button. When the remote controller is replaced or the drone is replaced, the remote controller and the drone must be manually operated. For code operations, as follows:
Start the drone > Turn on the remote controller, wait 15 seconds, press and hold the power button until the remote controller beeps, the remote controller power button flashes red light > short press the aircraft pair code button, the aircraft tail yellow light goes out > After the code is successful, the remote control power button white light is always on, the battery indicator is off, the aircraft yellow indicator light is always on.