GEP-MK5D O3 DeadCat Frame

The 2-inch GEP-CL20 frame was made by the GEPRC group. The 2-inch frame can be changed to O3 VTX and discharge stunning effects in a compact area. It is also portable in a limited area. The resigned camera gimbal easily fixes the high-frequency shaking and jelly issues. A naked GP camera base may be linked to the camera gimbal thanks to its soft connection dampening design, making it easier to install DJI Action2, Insta360 Go2, and Naked camera GP8/910/11 cameras.

A number of VTX holes with dimensions of 20 mm by 20 mm or 25.5 mm by 25.5 mm are available on the market, and the flight controller mounting hole spacing is 25.5 mm by 25.5 mm. Larger motors from the 12–13 series are

Includes

Standard Edition List:
Frame:
1 x 2.0mm small top plate
1 x 2.5mm large top plate
1 x 2.5mm front bottom plate
1 x 2.5mm rear bottom plate
2 x 5.0mm front arms
2 x 5.0mm rear arms
1 x 5.0mm arm limit plate
1 x 2.0mm front protection plate
1 x Camera aluminum part
1 x Set of screws

3D printed parts:
1 x Camera vibration reduction mount
1 x O3 VTX mount
1 x VTX antenna mount
1 x TBS antenna mount

Accessories:
8 x M3x8 flight controller shock absorbing ball
4 x 10x50mm motor hubs

Other Accessories:
1 x M15x250 Batteries straps
2 x M20x250 Batteries straps
2 x Battery non-slip mat
8 x EVA tripod shock pads
1 x EVA camera base
1 x EVA camera base (with backrest)
1 x 3M double-sided tape
1 x 1.5mm L-type screwdriver
1 x 2.0mm L-type screwdriver
1 x Antenna fixed tube

Pro Edition List:
Frame:
1 x 2.0mm small top plate
1 x 2.5mm large top plate
1 x 2.5mm front bottom plate
1 x 2.5mm rear bottom plate
2 x 5.0mm front arms
2 x 5.0mm rear arms
1 x 5.0mm arm limit plate
1 x 2.0mm front protection plate
1 x Camera aluminum part
1 x Set of screws

3D printed parts:
1 x Front protector
4 x Motor shock pads
1 x Buzzer Holder
1 x VTX antenna mount
1 x TBS antenna mount
1 x GP camera mount
1 x Naked GP 8 camera Base
1 x Camera vibration reduction mount
1 x O3 VTX mount

Accessories:
8 x M3x8 flight controller shock absorbing ball
4 x 10x50mm Motor hubs

Other Accessories:
1 x M15x250 Batteries straps
2 x M20x250 Batteries straps
2 x Battery non-slip mat
1 x EVA camera base
1 x EVA camera base (with backrest)
1 x 3M double-sided tape
1 x 1.5mm L-type screwdriver
1 x 2.0mm L-type screwdriver
1 x 3.0mm L-type screwdriver
1 x M8 Wrench
1 x Antenna fixed tube

Specifications

GEP-MK5X O3 Frame

• Wheelbase: 225mm

• Top plate: 2.5mm

• Bottom plate: 2.5mm

• Arm plate: 5mm

• FC mounting holes: 30.5mm x 30.5mm

• Camera installation space: 20mm

• Suitable propeller size: 5″propeller

• Dimension: 214mm x 168mm x 42mm

• Standard Version Weight: 141.9g

• Pro Version Weight: 156.1g