Avata 2 Battery

  • Intelligent Flight Battery purpose-built for DJI Avata 2 FPV drone.

  • Capacity 2150 mAh, 31.7 Wh, 14.76 V Li-ion pack.

  • Delivers up to ~23 minutes of flight time per battery (tested in ideal conditions).

  • Fast top-up: ~45 min (0–100%) via Avata 2 Two-Way Charging Hub (60 W); ~88 min when charging directly in drone (30 W).

  • Approx. 145 g lightweight module; charge temp 5–40 °C.

Category:

Description

DJI AVATA 2 Battery

 

Product Detail
Product name DJI Avata 2 Intelligent Flight Battery
Model / MFR # CP.FP.00000152.01
Battery type Li-ion
Capacity 2150 mAh
Energy 31.7 Wh @ 0.5C
Standard voltage 14.76 V
Max charging voltage 17 V
Approx. weight 145 g
Estimated flight time Up to ~23 minutes (measured in calm air, sea level, forward flight at 21.6 km/h; results vary)
Charging temperature 5° to 40 °C (41° to 104 °F)
Charging time (with Two-Way Charging Hub, 60 W) ~45 min (0–100%) / ~30 min (10–90%)
Charging time (directly in aircraft, 30 W) ~88 min (0–100%)
Compatibility DJI Avata 2

Avata 2 Battery

 

Power your FPV flights with confidence. The DJI Avata 2 Intelligent Flight Battery is purpose-built for the Avata 2, pairing high-density lithium-ion cells with DJI’s smart battery management to deliver dependable power, accurate remaining-time readings, and safer charging—flight after flight.

Designed specifically for high-agility FPV maneuvers, this compact pack balances capacity (2150 mAh / 31.7 Wh) with a lightweight build for responsive handling. In ideal test conditions, a single battery supports up to ~23 minutes of airtime, so you can practice lines, capture more dives, and spend less time on the ground swapping packs.

The integrated Battery Management System (BMS) continuously monitors cell health and status, helping protect against overcharge, over-discharge, short circuit, and overheating. Smart features like auto-discharge for long-term storage help maintain battery condition between sessions, while in-app readouts make it easy to check percentage, cycle count, and estimated remaining flight time before takeoff.

Recharging is straightforward and efficient. Pair the battery with the Avata 2 Two-Way Charging Hub (60 W) for a quick top-up—ideal when you’re rotating multiple packs—or charge directly through the aircraft when traveling light. Thoughtful physical design with a secure latch and clear status LEDs makes every swap fast and fumble-free.

Compatibility: Exclusively for DJI Avata 2. (Not compatible with other Avata or DJI aircraft.)

Typical Use Cases

  • FPV freestyle practice and cinematic runs where consistent voltage and accurate remaining-time info matter

  • Indoor whoop-style workflows that benefit from quick hot-swaps and reliable charge status

  • Travel shoots—at 31.7 Wh, each battery is within most airlines’ carry-on limits (always confirm your airline’s policy)

What’s in the box

  • Avata 2 Intelligent Flight Battery × 1

Care & Safety Tips

  • Charge only with compatible DJI chargers/hubs and within the recommended temperature range

  • Allow the battery to cool before recharging after intensive flights

  • For storage longer than a few days, keep the pack partially charged in a cool, dry place and let auto-discharge manage levels

  • Inspect regularly; do not use if swollen, damaged, or exposed to liquids

Key Numbers at a Glance

  • Capacity: 2150 mAh

  • Energy: 31.7 Wh

  • Voltage: 14.76 V (max charge 17 V)

  • Estimated flight time (ideal conditions): up to ~23 min

  • Approx. weight: ~145 g

  • Recommended charge temperature: 5–40 °C

  • Fast recharge with Avata 2 Two-Way Charging Hub (60 W); direct charging also supported

There are no reviews yet.

Be the first to review “Avata 2 Battery”

Your email address will not be published. Required fields are marked *