Pixhawk 6C Flight Controller with PM02 Power Module & M8N GPS

Advanced H7 Flight Controller – Built around a high-performance STM32H743 processor running at up to 480 MHz for demanding UAV and autonomous flight applications.
Integrated M8N GPS Module – Includes an M8N GPS module for reliable positioning and navigation support in compatible drone systems.
Redundant IMU Sensors – Features multiple inertial sensors, including ICM-42688-P and BMI088 accelerometer/gyroscope sensors, for improved flight data reliability.
Integrated Magnetometer & Barometer – Includes IST8310 magnetic sensing and MS5611 barometric sensing for comprehensive flight-control data.
High-Speed Processing – The STM32H743 FMU processor provides 2MB Flash memory and 1MB SRAM for advanced flight-control applications.
Dedicated I/O Processor – Includes an STM32F103 I/O processor to manage peripheral interfaces and support responsive system operation.
Integrated Vibration Isolation – The flight controller is designed with vibration-isolation features to help reduce high-frequency vibration effects on sensor readings.
Compatible with PX4 & ArduPilot – Suitable for UAV development and autonomous flight projects using supported open-source flight-control firmware.
Comprehensive Connectivity – Provides multiple interfaces for GPS, telemetry, CAN, I2C, RC input, PWM outputs, and other compatible peripherals.
Complete Flight-Control Package – Includes the flight controller, PM02 power module, M8N GPS module, and cable set for streamlined integration into compatible UAV systems.

Trusted dealerDirect manufacturer partnership
Pan-India deliveryInsured shipping, all states
Post-sale supportTraining + service included

Overview

What makes it work

Pixhawk 6C Flight Controller with M9N GPS & PM02

🧠

STM32H743

FMU Processor, 480MHz

🎯

2x IMU

ICM-42688-P + BMI088

🧭

IST8310

Magnetometer

📡

M9N

GPS Module

🔋

2-12S

PM02 Power Input

🔌

16 PWM

Servo Outputs

💾

2MB / 1MB

Flash / SRAM

✅

PX4 + ArduPilot

Firmware Support

Technical Details

Full Specifications

Flight Controller Specifications
Specification	Details
Product	Pixhawk 6C Flight Controller — genuine Holybro hardware, bundled with a PM02 power module and M9N GPS/compass module
FMU Processor	STM32H743, 32-bit Arm Cortex-M7 @ up to 480MHz, 2MB flash, 1MB SRAM
I/O Processor	STM32F103, 32-bit Arm Cortex-M3 @ 72MHz, 64KB SRAM
IMU Sensors	ICM-42688-P and BMI088 accelerometer/gyroscope — redundant sensors for reliability
Magnetometer	IST8310
Barometer	MS5611
PWM Outputs	16 total (8 from FMU, 8 from I/O)
Interfaces	3 general-purpose serial ports (Telem1/2/3), 2 GPS ports, 1 I2C port, 2 CAN buses, 2 debug ports
Dimensions	Approximately 84.8mm x 44mm x 12.4mm
Weight	59.3g (aluminum case) or 34.6g (plastic case)
Operating Temperature	-40°C to 85°C
xBoom SKU	xboom-145404

PM02 Power Module & M9N GPS
Specification	Details
PM02 Input Voltage	7-51V DC (2-12S LiPo compatible)
PM02 Current Rating	60A rated, up to 120A maximum
PM02 Regulated Output	5.2V at up to 3A for the flight controller
GPS Module	Ublox Neo-M9N GNSS receiver with integrated IST8310 compass — the unit’s own housing is clearly labeled “M9N”
GPS Sensitivity	-167dBm navigation sensitivity, approximately 26 second cold start
GPS Physical	Ceramic patch antenna, protective case, 26cm cable, approximately 50mm diameter, approximately 32g with case
Package Contents	Pixhawk 6C flight controller, PM02 power module, GPS/compass module, and a complete cable set

Product Overview

A Complete, Genuine Flight-Control Kit

Pixhawk 6C Flight Controller: Genuine Holybro Hardware, Ready to Fly

This is a genuine Holybro Pixhawk 6C, built around the STM32H743 FMU processor running up to 480MHz with 2MB of flash and 1MB of SRAM, paired with a dedicated STM32F103 I/O processor to keep peripheral handling responsive. Redundant IMU sensors (ICM-42688-P and BMI088) plus an IST8310 magnetometer and MS5611 barometer give the flight controller genuinely reliable sensor data, backed by built-in vibration isolation to keep high-frequency vibration from corrupting sensor readings — the kind of hardware-level reliability that matters once you’re flying anything beyond a toy.

The bundle includes a PM02 power module (accepting 2-12S LiPo input and delivering a clean, regulated 5.2V to the flight controller) and a GPS/compass module — worth a direct note here: the GPS unit’s own housing is clearly labeled “M9N,” Holybro’s newer Ublox Neo-M9N receiver, which tracks 4 GNSS constellations simultaneously versus 3 on the older M8N generation, for better positioning accuracy. Everything ships with a complete cable set, and the flight controller is compatible with both PX4 and ArduPilot, the two dominant open-source flight-control platforms, giving you real flexibility in how you build and fly.

🧠

STM32H743 @ 480MHz

High-speed processing for demanding autonomous flight applications.

🎯

Redundant IMU Sensors

Dual accelerometer/gyroscope sensors for reliable flight data.

📡

M9N GPS + Compass

4-constellation GNSS tracking for accurate positioning.

🔋

PM02 Power Module Included

Clean 2-12S power delivery, ready to wire into your build.

Product Gallery

See Every Detail

Pixhawk 6C Flight Controller, genuine Holybro board with labeled connector ports

Every Port, Clearly Labeled

Genuine Holybro board, top view showing the Pixhawk 6C branding

The Flight Controller Board

The Complete Kit, Unpacked

The full bundle laid out: the Pixhawk 6C board, the M9N GPS/compass puck, the PM02 power module with its XT60 connector, and the cable set needed to wire everything together.

Complete Pixhawk 6C kit showing the flight controller, M9N GPS module, PM02 power module, and cables

Genuine M9N GPS and Compass

The GPS/compass puck included in this kit, clearly labeled “M9N” on its own housing — Holybro’s newer 4-constellation GPS module, not the older M8N generation.

Holybro M9N GPS and compass module included with the Pixhawk 6C kit

Features & Capabilities