Unitree G1+ EDU Ultimate I Humanoid Robot
- WuJi 5-finger dexterous hands (no tactile sensing) with wrist RGB cameras
- WuJi hand: 20 active DOF, fully opposable with lateral swing, revolute joints direct drive and back-drivable, approx. 185×80×40mm frame
- 1000 Hz × 20 axes control, MIT force/position hybrid control, EtherNet (1000BASE-T), fingertip peak force ≥15N, opening/closing ≥4 times/s, joint backlash <1°, 16-58V DC
- Wrist RGB camera included: FOV D 130° / H 120° / V 81°, resolution 1920×1080
- Total DOF reaches 71: 6 per leg, 2 head, 3 waist, 7 per arm + end-effector
- Built-in 100 TOPS computing power expansion dock with 8-core CPU; arm maximum payload 4kg; binocular + wide-angle dual vision, 3D LiDAR, 6-microphone array, dual 10W speakers
- Supports high-level and low-level secondary development, with technical support and development manuals; smart OTA upgrades
- Trusted dealerDirect manufacturer partnership
- Pan-India deliveryInsured shipping, all states
- Post-sale supportTraining + service included
What makes it work
G1+ EDU Ultimate I Humanoid Robot
Three key dimensions: motion performance, perception & interaction, and intelligent experience
6 major upgrades, all at once

6 major upgrades, at a glance
Every upgrade comes to life in real-world scenarios — greater flexibility, more power, smarter interaction, and greater endurance.
+2 DOF
Pitch: -25° to 36° | Yaw: ±110°
Flexible head rotation for natural environmental perception and interaction

Comprehensive motor upgrades
Shoulder & waist motors: peak torque +110%, heat generation at the same torque −72%
Arm motors: peak torque +43%, heat generation at the same torque −30%
Thigh motors: heat generation at the same torque −28%

Binocular + wide-angle dual vision system
Binocular camera: 60 mm baseline | 2 MP | Center ≥500 LW/PH | FOV H110° / V80° / D125°
Wide-angle monocular camera: 1920×1080@30fps | FOV H117° / V67°
Stereo depth perception, ultra-wide field of view, enhanced spatial understanding and environmental perception

Tactile perception
Head-integrated tactile sensors; tap to initiate dialogue and trigger motion, making the robot more personable

Runtime power supply & charging
Supports external power supply for long-term operation, meeting the needs of research and demonstration scenarios.

Far-field voice pickup · dual waist speakers
6-microphone array (4 front + 2 rear), precise DOA sound source localization
Supports external wireless microphones
Long-range interaction, strong noise suppression, clear voice pickup in noisy environments
Dual 10W powerful waist speakers
G1+ Head, Perception & Power Layout

Head Touch
5 high-sensitivity touch points
Head Motor
Pitch + yaw, 2 degrees of freedom
Multi-vision perception
Dual 2MP global-shutter cameras + a wide-angle monocular camera
Microphone array
Noise reduction and echo cancellation
Rear external power input
DC 54.6V, ≤7.4A
Wireless microphone charging case
50 m transmission range, 80 dB signal-to-noise ratio
G1+ — The transformation has already begun
Retaining G1's exceptional value, with comprehensive upgrades in motion, perception, and intelligence.
G1+ EDU Ultimate I — Version Highlights
- Includes all features of the G1+ EDU Plus version
- WuJi five-finger dexterous hand ×2 (no tactile sensing, with wrist camera)
- Total DOF reaches 71
- No tactile sensing
- 18-month whole machine warranty
- Includes protective bracket
Technical Specifications — G1+ EDU Ultimate I
| Dimensions (H×W×D) | Standing: 1340×450×200mm Folded: 690×450×300mm |
|---|---|
| Weight (with battery) | Approx. 35kg+ |
| Total Degrees of Freedom | 71 (joint motors + end-effector) |
| Single Leg / Head DOF | 6 / 2 |
| Waist DOF | 3 (Z ±155°, X ±30°, Y ±30°) |
| Single Arm DOF | 7 (both arms upgraded) |
| Wrist Joint | P ±92.5°, Y ±92.5° |
| Knee Max Torque | 120N·m |
| Arm Max Payload | Approx. 4kg |
| Lengths | Lower leg + thigh: 0.6m Arm span: approx. 0.45m |
| Joint Range | Waist (Z ±155°); Knee (0~165°); Hip (P ±154°, R −30°~+170°, Y ±158°) |
| Joint Output Bearing | Industrial-grade crossed roller bearings |
| Joint Motor | Low-inertia, high-speed inner rotor PMSM |
| Internal Wiring | Yes (all joints) |
| Encoders | Dual encoders |
| Cooling | Local air cooling |
| End Effector | WuJi five-finger dexterous hand ×2 (no tactile sensing, with wrist camera) |
|---|---|
| Active Degrees of Freedom | 20 DoF |
| Grasping Configuration | Fully opposable, supports lateral swing |
| Kinematic Configuration | Revolute joints direct drive, back-drivable |
| Dimensions | Approx. 185×80×40mm (frame) |
| Minimum Grasping Diameter | 0 |
| Control Frequency | 1000 Hz × 20 axes |
| Control Mode | MIT force/position hybrid control |
| Communication Protocol | EtherNet (1000BASE-T) |
| Fingertip Peak Force | ≥15N |
| Opening/Closing Speed | ≥4 times/s |
| Joint Backlash | <1° |
| Operating Voltage | 16–58V DC |
| Wrist RGB Camera | Included — FOV D 130° / H 120° / V 81°; resolution 1920×1080 |
| Power System | 13S lithium battery 1 charger (54V 5A), 1 smart battery (9000mAh, quick release) |
|---|---|
| External Power | Supported (DC 54.6V, ≤7.4A) |
| Compute | 8-core high-performance CPU Built-in 100 TOPS computing power expansion dock |
| Sensors | Binocular camera ×1, wide-angle camera, 3D LiDAR ×1, chest wireless microphone (50m range, 80dB SNR), 6-microphone array |
| Speakers | Dual 10W waist speakers |
| Wireless | WiFi 6, Bluetooth 5.2 |
| Accessories | 1× handheld remote controller; protective bracket included |
|---|---|
| Battery Life | Approx. 2h |
| Smart OTA Upgrades | Supported |
| Secondary Development | Supported (high-level and low-level), with technical support and development manuals |
| Warranty | 18 Months |
Frequently Asked Questions
What is the G1+ EDU Ultimate I?
The G1+ EDU Ultimate I is a version of the G1+ humanoid robot for education, research and secondary development, with 7-DOF arms and a 3-DOF waist, 2 head DOF and 6 DOF per leg. Configuration: WuJi five-finger dexterous hand ×2 (no tactile sensing, with wrist camera).
How many degrees of freedom does the G1+ EDU Ultimate I have?
The total reaches 71 DOF, with 6 per leg, 2 for the head, 3 for the waist and 7 per arm, plus the end-effector.
What is included in the G1+ EDU Ultimate I?
All functions of the G1+ EDU Standard version: a built-in 100 TOPS computing expansion dock, 4kg arm payload, a handheld remote controller, a smart quick-release battery with charger, and a protective bracket.
Does the G1+ EDU Ultimate I support secondary development?
Yes. It supports high-level and low-level secondary development, with technical support, comprehensive development manuals and ecosystem support, and includes AI algorithms.
What are the dimensions, battery life and warranty of the G1+ EDU Ultimate I?
It stands 1340×450×200mm and folds to 690×450×300mm, weighs approx. 35kg+ with battery, runs approx. 2 hours on battery or on external power (DC 54.6V), and carries an 18-month whole machine warranty.


There are no reviews yet.