PUDU MT1 Max Outdoor Robotic Sweeper
- AI-Powered 3D Perception – 3D LiDAR and multi-sensor fusion create accurate environmental maps and enable real-time obstacle avoidance, even in high-ceiling, nighttime, and high-interference environments.
- Wide 70 cm Sweeping Width – Efficiently collects cigarette butts, paper scraps, large bottles, and other debris in a single pass.
- Large 35 L Waste Container – High-capacity waste storage reduces the need for frequent emptying during large-area cleaning operations.
- Up to 100,000 m² Cleaning Coverage – Designed for large facilities and outdoor areas, with cleaning efficiency of up to 2,200 m²/h and spot cleaning of up to 7,000 m²/h.
- Dual-Chip AI Cleaning – Automatically adjusts cleaning power and brush angle based on the type and amount of debris.
- AI Trash Recognition & Spot Cleaning – Detects waste and intelligently performs targeted cleaning where required.
- Trusted dealerDirect manufacturer partnership
- Pan-India deliveryInsured shipping, all states
- Post-sale supportTraining + service included
What makes it work
MT1 Max
AI-Powered 3D Perception Robotic Sweeper
Built for outdoor and semi-outdoor spaces, the MT1 Max fuses 3D LiDAR with multi-sensor perception to map, navigate and sweep large-scale environments — clearing everything from cigarette butts to large bottles while covering up to 100,000 m² around the clock.
3D Perception Integration
Magic Cleaning
Intelligent Active Interaction
Empty the Facility of Any Dirt & Trash
AI Adaptive Cleaning
Covers Up to 100,000 m²
Smart Obstacle Avoidance Upgrade
24/7 Continuous OperationThe MT1 Max at Work
Watch the AI-powered 3D-perception sweeper navigate and clean real outdoor and semi-outdoor spaces.
Sees More, Navigates Smarter
A 3D perception system (3D LiDAR + multi-sensor fusion) maps environments accurately and detects obstacles in real time — performing reliably even in high ceilings, at night, or under heavy interference.
From Cigarette Butts to Large Bottles
MT1 Max removes everything from cigarette butts and paper scraps to large bottles in a single sweep.
Automatic Filter Cleaning
Automatically cleans the filter for an integrated loop of operation and maintenance — minimizing manual intervention and maximizing continuous productivity.
Large 35 L Waste Container
A high-capacity waste container means fewer emptying stops and longer autonomous cleaning runs across large facilities.
Dual-Chip AI Architecture
A dual-chip architecture delivers faster, more precise AI processing with built-in redundancy. Hardware-software collaboration keeps sensors and motors in sync — enabling AI adaptive cleaning, trash recognition and spot cleaning.
Cleaning Mode Adaptation
Light debris triggers automatic power reduction to prevent scattering; heavy debris increases power for thorough cleaning.
Cleaning Posture Adaptation
Automatically adjusts angle to guide debris into the dual-brush gap, reducing misses.
Fully Upgraded 3D LiDAR Avoidance
A fully upgraded obstacle-avoidance system with 3D LiDAR enables smarter dynamic avoidance and differentiated strategies for vehicles, pedestrians and animals.
Dynamic Vehicle Avoidance
Stops to let vehicles pass, pauses at lane entrances, or edges aside while keeping the route clear and traffic undisturbed.
Pedestrian & Animal Avoidance
Reacts quickly to sudden "pop-out" movements or animals crossing, enhancing overall safety.
Multi-Dimensional Safety Upgrades
Combining structural protection with intelligent responses — audible and visual alerts, slope climbing and obstacle overcoming, and proactive rain avoidance — the MT1 Max actively senses and intelligently responds to its environment.
IP54 Sealing
Full IP54 sealing defends against dust ingress and water spray for consistent reliability.
Water-Drop Sensor*
Automatically detects water drops and triggers a protective avoidance mode, guiding the robot to safe zones while reducing electrical risks.
Warning & Safety Lights
A 1.2 m high warning light plus a safety projection light and audible/visual alarms boost visibility for pedestrians and vehicles.
Round-the-Clock, No Downtime
High-capacity batteries, rapid charging and auto-docking technology enable continuous 24-hour operation to meet high-frequency cleaning demands without downtime.
Connected to Your Whole Facility
MT1 Max integrates with elevators and e-gates and is managed through the PUDU Link platform — moving freely between zones and floors as part of a connected operation.
Full Specifications
| Dimensions | 840 × 600 × 675 mm (33 × 23.6 × 26.6 in) |
| Weight | 85 kg (187.39 lbs) |
| Cleaning Capabilities | Sweeping |
| Cleaning Performance | Cover cleaning: max. 2,200 m²/h (23,680.6 ft²/h) Spot cleaning: max. 7,000 m²/h (75,347 ft²/h) |
| Cleaning Width | 70 cm with side brush (27.6 in) |
| Waste Container Capacity | 35 L (9.25 US gal) |
| Navigation | VSLAM + Marker + 3D LiDAR SLAM |
| Cruise Speed | 0.2–1.2 m/s, adjustable (0.66–3.94 ft/s) |
| Battery Capacity | 60 Ah |
| Charging Time | < 3.5 h |
| Run-time | 5–10 h (Standard Mode 8 h) |
Frequently Asked Questions
Where can the MT1 Max be used?
How large an area can it cover?
What can it pick up?
How does it stay safe around people and vehicles?
How long does it run and how does it recharge?
Can it integrate with building systems?
The full sheet
Related products
-
·XBM·00
-
·XBM·01
-
·LND·02
-
·XBM·03
There are no reviews yet.