Skip to main content

Z1 Air (With Infrared Camera Gripper)

- 6-DOF robotic arm with 4kg to 5kg weight, 2kg payload and 740mm reach for mobile robot on-board use
- Repeat positioning accuracy of about 0.1mm for precise, repeatable motion
- Joint ranges: J1 ±150°, J2 0°–180°, J3 -165°–0°, J4 ±80°, J5 ±85°, J6 ±160°
- Sensitive collision detection, manual drag teaching, position control and force control
- Ethernet interface, Ubuntu user OS, 24V supply (>20A), max power 500W
- Z1 mechanical gripper: 139×80×68mm, 700g–750g, 200N max jaw force, 150N fingertip force, 90° opening, 0.5s open/close, 24V, 70W peak, RS485
- 1080P infrared waterproof network camera, 1/2.7" progressive scan CMOS, ICR infrared cut filter
- 940 infrared wavelength, colour illumination 0.01 Lux @ F1.2 with AGC enabled

  • Trusted dealerDirect manufacturer partnership
  • Pan-India deliveryInsured shipping, all states
  • Post-sale supportTraining + service included
Overview

What makes it work

Z1 Air (With Infrared Camera Gripper)

Perfect synergy with mobile platforms. Compact and lightweight 6-DOF robotic arm

6Axis / DOF
4–5kgWeight
2kgPayload
740mmReach
~0.1mmRepeatability

Compact, Dexterous and Precise

Compact & Lightweight

Designed as an on-board arm for mobile robots.

Dexterous & Flexible

6 axes of motion with wide joint ranges.

Sufficient Payload

Payload of 2kg.

Sufficient Accuracy

Repeat positioning accuracy of about 0.1mm.

Joint Force Control

Position control and force control supported.

Collision Protection

Sensitive collision detection with force feedback.

Z1 Gripper

The z1 gripper and a 1080p infrared waterproof network camera.

Max jaw clamping force 200N, max opening angle 90°, open/close time 0.5s.

Z1 Air (With Infrared Camera Gripper) gripper

Open Programming Interface and Extended Interface

The manipulator control program and control interface will be successively opened, and different actuators can be quickly replaced at the end of the manipulator.

Joint Motor

High-torque, compact joint motors with force-control capability, 1 kHz control frequency and torque / angle / angular-velocity feedback.

Application

Mobile robots' on-board manipulator, e-commerce logistics, new consumption, daily life and more.

Technical Specifications — Z1 Air (With Infrared Camera Gripper)

Manipulator Parameters
ModelZ1 Air
Degrees of Freedom6 axis (6 DOF)
Weight4kg to 5kg
Payload2kg
Reach740mm
Repeat Positioning AccuracyAbout 0.1mm
Power Supply24V, current >20A
Max Power500W
InterfaceEthernet
User OSUbuntu
Force Feedback & Collision DetectionProvided (sensitive collision detection)
TeachingManual drag teaching
Control InterfacePosition control + force control
Joint Range (max speed 180°/s per joint)
Joint 1 (J1)±150°
Joint 2 (J2)0° ~ 180°
Joint 3 (J3)-165° ~ 0°
Joint 4 (J4)±80°
Joint 5 (J5)±85°
Joint 6 (J6)±160°
Joint Motor
Backlash~6 arcmin
CommunicationRS485
Max Torque33 N·m
Encoder15-bit
Weight405g
Force Control Accuracy~0.2 N·m
SizeΦ65 × 52mm
Control Frequency1 kHz
ReducerHarmonic reducer
BearingIndustrial-grade cross roller bearing
Reduction Ratio60+
Voltage24V (recommended)
Z1 Mechanical Gripper
Gripper TypeZ1 mechanical gripper
Dimensions139mm × 80mm × 68mm
Weight700g ~ 750g
Max Jaw Clamping Force200N
Max Fingertip Clamping Force150N
Max Opening Angle90°
Open / Close Time0.5s
Rated Voltage24V
Peak Power70W
CommunicationRS485
Camera
Camera1080P infrared waterproof network camera
Image Sensor1/2.7" progressive scan CMOS
IR Cut FilterICR infrared cut filter
Infrared Wavelength940
Color Illumination0.01 Lux @ F1.2, AGC enabled

Frequently Asked Questions

What is the Z1 Air (With Infrared Camera Gripper)?

The Z1 Air is a compact, lightweight 6-DOF robotic arm built for mobile robot on-board use, with sensitive collision detection, manual drag teaching, and position and force control. It comes with the Z1 gripper and a 1080P infrared waterproof network camera.

What are the weight and payload of the Z1 Air (With Infrared Camera Gripper)?

The arm weighs 4kg to 5kg and carries a payload of 2kg, with a reach of 740mm and repeat positioning accuracy of about 0.1mm.

What are the joint ranges of the Z1 Air (With Infrared Camera Gripper)?

J1 ±150°, J2 0° to 180°, J3 -165° to 0°, J4 ±80°, J5 ±85°, J6 ±160°.

What control and teaching features does the Z1 Air (With Infrared Camera Gripper) support?

It supports sensitive collision detection, manual drag teaching, and position control plus force control (force feedback), with an Ethernet interface and a 24V power supply.

What camera does the Z1 Air (With Infrared Camera Gripper) include?

The Z1 gripper on this version is equipped with a 1080P infrared waterproof network camera with a 1/2.7" progressive scan CMOS sensor, ICR infrared cut filter, 940 infrared wavelength and 0.01 Lux colour illumination at F1.2 with AGC enabled.

Specifications

The full sheet

Reviews

What buyers say

There are no reviews yet.

Be the first to review “Z1 Air (With Infrared Camera Gripper)”

Your email address will not be published. Required fields are marked *

WhatsApp Chat
Hit enter to search or ESC to close