Hollyland LARK M1 DUO
This 2.4 GHz LARK M1 DUO Wireless Microphone System from Hollyland lets you record up to two persons for mobile journalism or content development applications. One dual-channel receiver and two transmitters with omnidirectional built-in microphones are included in the system, which has a small overall footprint. Each transmitter has clips on the back that let you fasten them to a shirt’s lapel. The receiver can be connected to compatible smartphones or cameras using TRS to TRS and TRS to TRRS adaptor cords.
Advantages of Hollyland Lark M1
A charging case is included with the Lark M1 lav microphone to guarantee continuous battery life all day. The Type-C interface on the M1 microphone transmitter and receiver allows for simultaneous operation and charging. Low battery conditions are no longer a concern.
- One-click Smart Noise Reduction
- CD-level Lossless Sound Quality
- Storage and Charging Two-in-One
- Intelligent Device Recognition
- 656ft Long Transmission Distance
- Wide Range Applications
One-click Smart Noise Reduction
Lark M1 lavalier microphone, adopting innovative HearClear Noise cancellation technology and DSP algorithm, takes only one click to turn on and delivers high-performance recording quality in virtually any recording environment. When turned off, it provides a richer audio ambience and a real-life sound effect.
Small & Portable
Lark M1 wireless lavalier mic is super compact and lightweight, only 0.42oz and 0.4″ in thickness. Designed with a built-in clip, it can be easily snapped on virtually collars. With a flat and sleek design, it’s even smaller than a USB flash drive. It feel like nothing on your collar but a photogenic item.
8h Long Battery Life, Fast Charging
The Lark M1 micriphone can work up to 8 hours after a full charge. In full capacity, the charging case can charge the whole set twice, and keep them working up to 20h. It takes only 1.5h to charge the TX/RX. After a short break, the device will be fully powered again.
650ft Long Transmission
Lark M1 lapel microphone’s transmission distance is up to 656ft and the delay is less than 0.08s. Automatic frequency switching when there is interference. Upgraded Bat Obstacle Avoidance 2.0 transmission technology optimizes the codec algorithm for the audio wireless baseband transmission protocol, and improves the stability of long-distance transmission by 90%.
HiFi Sound Quality, Rich Audio Details
Using LC3 codec + up to 48KHZ/16bit sampling rate to achieve a sound quality beyond CD level, Lark M1 records sound for you without loss and compression. Its high sound is transparent and undistorted, and its bass is thick and magnetic. Let’s make audio creation one step closer to art.
Auto Device Recognition
Ready to use out-of-the-box, no tedious setting. Lark M1 mic system will automatically identify the connected device (mobile phone or camera), select working modes, and adaptive volume settings. No manual adjustment is required.
Note:
- After the receiver and microphone are fully charged in the charging case, they will automatically stop charging. When the units have not been used for a long time, the battery power will be consumed little by little. But when the charging case cover is opened again, it will be activated to detect the power of the receiver and microphone and recharge the units.
- When the charging case is completely power off, it takes about 1.5 hours to fully charge a empty charging case without the TX/RX in it. When the charging case is fully charged, then it can charge 2 TX and RX twice.
- The receiver and microphone can be used while charging directly via USB Type-C port.
Specification
Wireless Technology | 2.4 GHz |
Included Transmitters | 2 x Clip-On with Microphone |
Diversity | Frequency |
Max Operating Range | 656.2′ / 200 m (Line of Sight) |
Max Transmitters per Band | 2 |
Built-In Recorder | No |
OS Compatibility | Android iOS *As of August, 2022: Check with manufacturer for the most up-to-date compatibility |
Bluetooth | Not Specified by Manufacturer |
Audio Codec | LC3 |
Sample Rate/Resolution | 48 kHz / 16-Bit |
Dynamic Range | 86 dB (Line Input) |
Encryption | None |
Receiver Type | Camera-Mount / Mobile Device-Mount / Portable |
Mounting Options | Belt Clip (with Included Hardware) |
Antenna | Internal |
Number of Audio Channels | 2 |
Audio I/O | 1 x 1/8″ / 3.5 mm TRS Female Unbalanced Output |
Phantom Power Protection | None |
Network I/O | None |
Word Clock I/O | None |
USB/Lightning Connectivity | 1 x USB-C Female (Charging) |
Power Requirements | Battery |
Battery Type | 1 x Built-In Rechargeable |
Internal Battery Capacity | 200 mAh |
Battery Charging Time | 1.5 Hours |
Approx. Battery Life | 8 Hours |
Display & Indicators | 2 x LED (Power) |
Dimensions | 1.1 x 1.9 x 0.4″ / 27.6 x 48.3 x 11 mm |
Weight | 0.6 oz / 17.5 g |
Transmitter Type | Clip-On with Microphone |
RF Output Power | Not Specified by Manufacturer |
Audio I/O | None |
Muting | Off/On Switch |
Auto-Level Control | No |
Recorder Sample Rates | 48 kHz |
Recorder Bit Depths | 16-Bit |
Sync Method | 2.4 GHz QPSK |
Antenna | Internal |
Power Requirements | Battery |
Battery Type | 1 x Built-In Rechargeable |
Internal Battery Capacity | 140 mAh |
Battery Charging Time | 1.5 Hours |
Approx. Battery Life | 8 Hours |
USB/Lightning I/O | 1 x USB-C (Charging) |
Display & Indicators | 1 x LED (Power) |
Dimensions | 0.8 x 1.9 x 0.4″ / 21.5 x 48 x 10 mm |
Weight | 0.4 oz / 11.8 g |
Microphone Type | Integrated |
Polar Pattern | Omnidirectional |
Frequency Range | 20 Hz to 20 kHz |
Maximum SPL | Omnidirectional: 100 dB SPL |
Package Weight | 0.665 lb |
Box Dimensions (LxWxH) | 6.2 x 4 x 2.3″ |
There are no reviews yet.